- The short answer for contractors counting crew hours
- Time tracking made for construction crews and contractors
- GPS time clocks that work from the job site
- Three kinds of tool, and what each asks of your crew
- Clocking in on a site with no office
- From hours on site to job costs and payroll
- What the bill is counted in
- A one-hour test on a live site
A construction time tracking app built for crews is the right call for a contractor whose main problem is getting accurate hours off site and into payroll, while a contractor suite with a time clock inside suits firms that also want scheduling and dispatch in the same place. If your people move between job sites all day, look hard at a GPS time clock that starts with the site.
Get the time app wrong on a building site and you won't find out in the demo. You'll find out on a Friday, when the foreman's texting photos of a paper sheet, two labourers swear they were on the extension job not the loft conversion, and the payroll admin is keying hours in by hand again. That's the job a construction timekeeping app has to do: who clocked in, where, on which job, and in a form the office can use without retyping it.
The short answer for contractors counting crew hours
I'd start with the narrowest tool that solves your problem. If hours are the only headache, a time tracking app made for construction crews should be quicker to roll out than a suite, and your crews will only have one new thing to learn. If you're already juggling a separate scheduling tool, a dispatch board and a shared drive, a contractor suite with a time clock inside can replace several logins at once. And if your crews hop between three or four sites a day, a GPS time clock that ties the clock to the job site will save more arguments than any feature on a spec sheet.
Whatever you pick, judge it on one test: can a foreman with cold hands and a cracked phone screen clock a crew in, on the right job, in under a minute? The rest of this page is about how to check that before you commit.
Time tracking made for construction crews and contractors
Arcoro Time
The time tracking product formerly sold as ExakTime, now under the Arcoro Time name, made to help construction crews and contractors track time.
Rhumbix
Mobile timekeeping and construction payroll in the same product, so the hours a crew logs and the pay run they feed sit together.
ClockShark
Time tracking aimed at field service and construction crews, worth a look when your firm does both site work and call-out jobs.
Workyard
A construction operations platform for contractors, built in its own words to track a crew's work hours without the guesswork.
Raken
A construction management app with a time clock built in, for contractors who'd rather keep crew hours inside their site management tool.
Contractor Foreman
Puts time tracking alongside dispatching, scheduling and documentation in one contractor suite, so the clock isn't yet another login for the office.
GPS time clocks that work from the job site
busybusy
A GPS time card app for field employees, putting the time card on the phone in a worker's pocket with GPS tracking alongside it.
Timeero
Starts and stops time tracking on its own as employees arrive at or leave a job site, so nobody has to remember to tap.
Buddy Punch
Online time clock software for teams spread across job sites and other locations, rather than a tool shaped only around construction.
Three kinds of tool, and what each asks of your crew
A time tool made for construction keeps its focus on the hours. Rhumbix goes a step further and pairs timekeeping with construction payroll in the same mobile product. Whichever you look at, check what it exports and to where before you sign up, because the export is where the time saving lives. A focused tool is a strength if your office already runs well and only the site end is broken.
A contractor suite treats the clock as one module among many. Contractor Foreman, for one, keeps dispatching, scheduling, time tracking and documentation in one place. The upside is one login and one record of each job. The cost is that everyone has to move into the suite, and a foreman who only wanted a time clock now has a menu full of things they'll never open.
Want AI doing the heavy lifting in your marketing?
I build the systems that handle the boring 80 percent, so you get your week back. Done properly, with the human kept in.
A GPS time clock is the lightest of the three. It knows where a worker is when they clock in, and in some cases starts the clock for them. I'd look at one first for small crews that move around. If you need hours split across cost codes in detail, test that before you rely on it.
Clocking in on a site with no office
There are two ways the clock gets started on site. Either each worker clocks themselves in on their own phone, or the foreman clocks the whole crew in from one device. Self clock-in puts the responsibility on the person being paid. Crew clock-in suits sites where not everyone has a work phone, or where you'd rather one person owned the record. Ask any vendor you're testing whether it supports both, and which it expects by default.
Then there's the geofence: a boundary drawn round the job site so the app knows when someone's inside it. Timeero's page says it starts and stops tracking automatically as employees arrive at or leave a job site. On a tight terraced street that boundary has to be drawn with care, or the van parked round the corner either counts or doesn't. Draw it, walk it, and look at what the app records at the edge before you trust it with a payroll run.
Signal is the other thing to test rather than assume. Find the worst place on your site for signal, a basement or the far corner of a rural plot, and clock in there on purpose and check the entry still lands, with the right time, once the phone reconnects.
From hours on site to job costs and payroll
Hours only become useful when they're tied to something: a job, a phase, a cost code. If you price work by labour hours, check that every clock-in asks for the job and that switching jobs mid-day is a single tap, not a clock-out and a fresh clock-in. A crew that pours a slab in the morning and frames a wall in the afternoon should show up as two lines against two cost codes, not one long day.
Then follow the hours out of the app. Export a week, open the file, and see whether your payroll admin can use it without fixing anything. If the tool connects straight to a payroll product, run one test pay period through it. If you haven't settled on payroll yet, our round-up of payroll software for small businesses is the place to start, because the time app has to fit whatever sits at the other end.
Approvals matter here too. Somebody has to sign off a week's hours before they're paid. Check who can edit an entry after it's been made, whether the edit is logged, and whether the worker can see what was changed.
What the bill is counted in
Prices sit on each vendor's own pricing page, and that's where to read them, not in a comparison that may be months out of date. Workyard's pricing page, for one, prices per user each month, billed annually, with monthly billing also offered. Before you compare, count who'd need a login: every labourer, or only the foreman who clocks the crew in? Where a tool charges per user, a crew clock-in can change the number you're paying for, and seasonal workers who come and go can change it again.
Ask too what happens to past time records if you leave. You'll want a full export of every entry, with job and location, the day you cancel, not a summary.
Do you make construction timekeeping apps? Tool makers can ask to be considered for a featured place on this list.
A one-hour test on a live site
Pick a real crew of four to six and a real day with at least two jobs on it. Before they start, set up both jobs in the app and draw a geofence round each. Have one worker clock in on their own phone and the foreman clock in everyone else. At the first break, switch one person to the second job. Have someone clock out from just outside the geofence to see what the app does. At the end of the day, export the hours and hand the file to whoever runs payroll.
Score it on three things. Did every hour land on the right job? Did anyone need help clocking in? Could payroll use the export as it came out? If the answer to any of those is no, try the next tool on the list. If your problem turns out to be planning the work rather than recording it, the guide to construction scheduling software covers that side of the job.
Want your tool on this list? Featured spots and reviews here are paid partnerships. Here's how to partner with me.